Paired industrial media converters

Industrial SC Fibre Media Converter Pair

IES-1F2E-P + IES-1F1E for Remote Ethernet Connectivity

The Gigabit SC fibre link carries Ethernet data only. At the remote site, IES-1F2E-P requires local DC input and supplies PoE only through its two RJ45 ports. Transmission-distance variants of 20 km, 40 km and 60 km are selected before ordering.

Request a Quote Download Datasheets

IES-1F1E

IES-1F2E-P

IES-1F1E

Industrial Gigabit Media Converter with 1 SC Fibre Port and 1 RJ45 Port

1 × 10/100/1000Base-T RJ45 port and 1 × 1000Base-X SC fibre port
Dual redundant DC 12–58 V power inputs with reverse-polarity protection
Link Fault Pass-through, fibre-port speed selection, flow control and broadcast-storm suppression
4 kV surge protection; 8 kV contact and 15 kV air-discharge ESD protection
IP40 fanless enclosure for DIN-rail installation
Operating temperature: −40 °C to 75 °C

IES-1F2E-P

Industrial Gigabit PoE Media Converter with 1 SC Port and 2 RJ45 Ports

2 × 10/100/1000Base-T RJ45 ports and 1 × 1000Base-X SC fibre port
2 × IEEE 802.3af/at PoE+ ports with a total PoE budget of 60 W
Dual redundant DC 44–57 VDC inputs for IEEE 802.3af or 52–57 VDC for IEEE 802.3at/PoE+, with reverse-polarity protection; size the external supply for device consumption plus the required PoE load
250 m extended-mode Ethernet at 10 Mb/s, plus port isolation, SC fibre-port speed selection and remote PD reboot
4 kV surge protection; 8 kV contact and 15 kV air-discharge ESD protection
IP40 fanless enclosure for DIN-rail installation; operating temperature: −40 °C to 75 °C

Connection topology

Connection endpoints and paired operation

Two PoE devices connect to IES-1F2E-P, the SC fibre ports connect the paired converters, and the RJ45 port on IES-1F1E connects to the network switch. Single-fibre and dual-fibre versions are configurations selected before ordering.

Remote-site fibre data link topology with local PoE output

Application resources

Review the complete remote-site connection before ordering

Use the short video for the connection sequence and technical boundaries, then download the one-page application brief for project review or internal sharing.

Connection videoWatch the paired connection sequenceOpen the video only when you need the step-by-step connection review.

One-page application brief

Remote-Site SC Fibre Link with Local PoE Output

Verified connection endpoints
Local DC and PoE boundary
20 km, 40 km and 60 km ordering variants
Project details to confirm before quotation

Download application PDF

Complete specifications

Download both English datasheets

IES-1F1EEnglish datasheet · PDFDownload ↓IES-1F2E-PEnglish datasheet · PDFDownload ↓

Preliminary configuration review

Reviewing this pair for a remote Ethernet connection?

Send the fibre type and distance, available remote-site DC supply, connected-device count and PoE requirements for an initial review against the published specifications.

Request a Preliminary Configuration Review Browse application guides